Send a design to a Bernina artista over the cable
A twenty-year-old embroidery machine stitches as well as a new one. What ages is the way designs get in: the original Bernina artista models have no USB stick port, they expected their files over a serial cable, from software no recent computer can run. So we taught the studio to speak their language.
An old machine, a new driver
Between the computer and the machine you need a “driver”: the small program that knows what to say to the machine and how to read its replies. The artista’s one came from another era. We wrote a new one, right inside the studio: it finds the machine, opens its embroidery module, checks the free space, then drops the .exp design in piece by piece, checking every transfer.
It works with Bernina artista 165, 170, 180 and 185 fitted with their embroidery module, and it has already stitched designs on a very real artista.
What you need
- The machine’s serial cable, the one that used to link it to a computer (9-pin plug).
- A USB to RS-232 serial adapter for your computer, ideally with an FTDI or Prolific chip. Check the plugs: depending on the cable you may need a small male/female gender changer.
- A computer (Mac, Windows or Linux) with Chrome or Edge: those are the browsers that can talk to a serial port. Nothing to install.
Step by step
- Connect the machine to the computer and switch it on, with the embroidery module attached.
- In the studio, open Download and choose Bernina as your machine.
- Tap Test the connection: Chrome asks which port to use, pick the adapter’s line (often “USB Serial”). The studio finds the machine without writing anything to it.
- If all is well, tap Send to my Bernina by cable. The design appears in the module’s memory, ready to stitch.
If it doesn’t go through
- “The machine is not responding”: check it is switched on and that you picked the right port, not the Bluetooth or headphones one.
- Memory full: delete a design on the machine, then send again.
- Anything else: under the error, Copy the report gives the details of the exchange with the machine. Send it to us and we will see exactly where it stops.
If your Bernina is newer, with a USB port, the stick remains the simplest way: “From design to embroidery machine”.
Common questions
Does it work in Safari or on a phone?
No: only Chrome and Edge, on a computer, can open a serial port. In Safari the studio suggests opening Chrome or Edge.
My artista has no embroidery module: is it any use?
No. The design goes into the embroidery module’s memory, so without it the machine cannot receive it.
Do I still need the Bernina embroidery software or an embroidery card?
No. The original software no longer runs on recent computers and the cards have become hard to find: the studio replaces them for sending designs. It works on Mac, Windows 10 or 11 and Linux, in Chrome or Edge.
Do I need an account or software?
No software. The design is prepared in the studio, as for any machine, then goes down the cable.
Try the studio
Create your design and the studio exports the file in your machine’s format.
Try the studio