Lesbrodeuses

Machine embroidery thread: polyester or rayon?

5 min read · Published on 9 November 2026

Machine embroidery does not use everyday sewing thread. Embroidery thread is shinier and made to take thousands of fast stitches. Two families lead the way: polyester and rayon. Underneath the fabric, the bobbin takes a separate, finer thread.

In shortTo start with, choose 40 weight polyester: shiny, strong, and fine with washing and bleach. Rayon is even shinier but more delicate. In the bobbin, use white or black bobbin thread, finer than the top thread.

Polyester or rayon?

Both come in 40 weight, the standard for machine embroidery, and mix happily in the same design. How they differ, along with the other threads you will come across:

ThreadQualitiesBest for
Polyester 40 wtShiny, very strong, colourfast, fine with bleach and hot washesChildren’s clothes, towels, anything washed often: the right choice to start
Rayon (viscose) 40 wtThe shiniest and softest, but less strong and sensitive to bleachWall art, home decor, delicate items washed cool
CottonMatte, hand-made lookHousehold linen, vintage or rustic style
MetallicGold or silver, more temperamentalSmall accents, stitched slowly with a suitable needle
Bobbin threadFiner (often 60 to 90 wt), white or blackAlways in the bobbin, under the fabric

The number on the spool

The number printed on the spool is the thread weight, and it works backwards: the higher the number, the finer the thread. 40 is the standard: embroidery designs, the studio’s included, are calculated for it, with a size 75/11 embroidery needle. A 30 weight covers faster but needs a bigger needle; a 60 weight is for very small details.

Bobbin thread

The bobbin, under the fabric, only locks the stitches in place: you never see it on the right side. So it takes bobbin thread, finer and cheaper, white for light fabrics and black for dark ones. Pre-wound bobbins are handy too, and wound very evenly.

If the bobbin thread shows on top (little white dots along the edge of the letters), the top thread is too tight or threaded wrongly: raise the presser foot, rethread the top thread and check the bobbin is in the right way round. If it keeps happening, loosen the top tension slightly.

Looking after your spools

  • Away from light and dust: sunlight fades colours, and dust ends up in the machine.
  • Thread that keeps breaking is sometimes just old, brittle thread, rayon especially: try a new spool before changing any settings.
  • Use the right spool cap on the spool pin: the thread should unwind without catching.

And in the studio?

In My thread brand, pick the brand of your spools: under each colour of the design, the studio shows the number of the closest spool. Tick the ones you own with Tick my spools, then Stitch this design with my spools: the design is built from what is already in your box. The other half of good embroidery happens under the fabric: “Stabilizer for machine embroidery: which one for which fabric?”. And for the size of the design: “Machine embroidery hoop sizes: which hoop for which design?”.

Common questions

Can I embroider with sewing thread?

For a test, yes, but the result is duller and thicker: sewing thread is made to join fabric, not to cover a surface. For a real project, use embroidery thread.

Do I change the bobbin thread for each colour?

No: one white bobbin thread (or black on dark fabric) works for the whole design. Only change the bobbin when it runs out, or for embroidery that must look good on both sides.

Try the studio

Create your design and the studio exports the file in your machine’s format.

Try the studio